The Smartbox power cable connects directly to your car battery to provide continuous power to support the MiVue™ Dash Cam parking mode feature after the engine has been turned off. It prevents your car battery from being completely drained of power when not in use and has an auto shut off feature based on preset time and/or if your car battery voltage drops below a certain rating.
The MiVue™ Smartbox III can be used on the following models that don’t support the parking mode feature - MiVue™630. MiVue™700. MiVue™730. but will still allow the MiVue™ device to continuously record whilst running on the vehicles battery power once the vehicle is powered off.
For Navman MIVUE 150 SAFETY and MIVUE 870 SAFETY with USB-C connection. please contact Navman Customer Support on 1300 628 626 and quote your Smartbox S/N and we will send you a compatible adapter to use with this Smartbox at no cost.
Key Features
The Navman Smartbox III provides constant power supply to selected Navman MiVue™ single and 2 channel dash cams that don’t utilise the Y-cable to support Smart and Low Power Parking Modes*.
This helps manage cables and battery consumption.
The Navman Smartbox III has a built-in smart voltage protection and timer settings that will monitor your vehicle’s battery consumption when used in parking mode.
The Dash Cam will automatically shut off based on a pre-set time or if your vehicle’s battery voltage drops below a certain level to prevent excess drainage of the battery.
The Navman Smartbox III is particularly important to support your Dash Cam for use in the various Navman parking feature such as Parking. Smart or Low Power Parking Modes. for Dash Cams without Parking Mode* feature. this will allow your unit to continuously record whilst your car is off.
Using the Navman Smartbox III prevents excess drainage of your car battery whilst it supports this feature.
Suitable for selected Navman MiVue™ single and 2 channel dash cams that don’t utilise the Y-cable. Not suitable for MiVue™ ALTA range.
It is highly recommended for an Auto Electrician to install the Navman Smartbox III to your vehicle to prevent any electrical short outs.
*Check your Dash Cam User Guide and specifications to confirm if it has the parking features available such as Parking Mode. Continuous Recording. Smart or Low Power Parking Modes. Input Voltage: DC 12V/24V.
Max Output Voltage: 5V/2A Mini USB.
Compatibility list
MIVUE630
MIVUE660
MIVUE680
MIVUE690 SAFE
MIVUE698 DC
MIVUE730
MIVUE735
MIVUE740
MIVUE745
MIVUE750 WIFI
MIVUE755
MIVUE760 ULTRA
MIVUE150 SAFETY (Contact Navman Customer Support)
MIVUE765 SAFETY
MIVUE770 SAFETY
MIVUE870 SAFETY (Contact Navman Customer Support)
MIVUE780
MIVUE790 WIFI
MIVUE800 DC
MIVUE820 DC
MIVUE830 DC
MIVUE840 DC
MIVUE850 DC
MIVUE860 DC TYRE
MIVUE SPEEDOCAM DC
MIVUE900 DC
MIVUE1000 SENSOR XL
MIVUE1100 SENSOR XL DC
MIVUE1200 SENSOR XL DC
Not compatible with
MIVUE ALTA
MIVUE ALTA DC
MIVUE ALTA WORKMATE XDC